Modern roofing materials for making insulation for the roof of a house are of high quality and do an excellent job of protecting the house from precipitation. However, moisture can occur under the roof not only due to roof leaks. Much more often, the appearance of water is associated with the condensation of moist air vapor on cold roof surfaces.
The occurrence of moisture in the roofing pie is unacceptable, as this significantly reduces the service life of the wooden elements of the rafter system and insulation. That’s why making insulation for the roof of a house from moisture and steam are so important. Let’s consider the main points when performing hydro- and vapor barriers at a house’s top.
First of all, let’s remember the filling of the roofing pie and determine the place in it for insulating materials:
- Waterproofing film;
- Vapor barrier;
- Finishing the interior of the attic (often plasterboard).
There are different types of waterproofing materials making insulation for the roof of a house:
- regular film
- anti-condensation film
- diffusion membrane,
Their difference lies in the ability to retain and evaporate condensate. Conventional films solely represent a moisture barrier, while anti-condensation films and diffusion membranes can maintain a significant amount of condensate and evaporate it with well-arranged ventilation.
The basic rules for laying any waterproofing material for making insulation for the roof of a house are simple:
- waterproofing joints are laid with an overlap of 10-15 cm;
- waterproofing is laid on the entire surface of the roof, including places under the overhangs of the eaves and gables;
- waterproofing at the eaves overhang is discharged into the gutter or behind the front board;
- all roof connections – pipes, ventilation shafts – must be insulated especially carefully
Cold roof waterproofing
The need to waterproof a roof over an unheated attic could be more precise. However, no one is immune from rainwater and snow getting under the top, as well as the appearance of condensation under the top, which often happens when various communications, such as a chimney, pass under the roof.
The advantage of waterproofing a cold roof is that the conversion process will be pretty simple if you still want to create a warm room under the top.
It is recommended to use anti-condensation films; their purchase is more economical than membranes, but unlike conventional films, they contain a particular fleecy layer that retains excess moisture until it evaporates.
The waterproofing material for home insulation sydney is laid on the rafters with a mandatory overlap of the joints of up to 10-15 cm. It is essential to maintain a distance of 5 cm from the film to the roofing material, which requires the installation of additional elements (counter battens and sheathing). This will equalize the temperature of the outer and inner sides of the film.
Warm roof waterproofing
Insulating the roof with insulation is a mandatory procedure in home insulation sydney. Using some types of insulation implies the formation of condensation due to the significant temperature difference between the roofing material and the insulation. The waterproofing layer protects the insulation and the rafter system from excess moisture.
Installation of roof waterproofing is closely related to the creation of ventilation circuits necessary to evaporate accumulated moisture. It is possible to form different types of ventilation in the under-roof space for making insulation for the roof of a house:
- ventilation with one circuit between the waterproofing and the roof;
- ventilation with two circuits: between waterproofing materials and roofing and between waterproofing and insulation.
In any case, creating a distance between the waterproofing film and the insulation is essential for making insulation for the roof of a house. This can be done by incompletely embedding the insulation between the rafters or by stuffing additional slats onto the rafters before laying the waterproofing.
Vapor barrier for making insulation for the roof of a house
Roof insulation, which contains insulation, is required. The air masses of a warm living room have a large amount of water vapor, which will penetrate the insulation without vapor protection and significantly reduce the life and quality of its service. The vapor barrier is laid on top of the insulation inside the house. A lath is placed on top of it, and material such as drywall is attached to finish the room.
The modern roofing materials market offers a wide selection of vapor barriers. Vapor permeability is determined by density in grams per m2: the higher this value, the more influential the material. The main types of vapor barriers are for making insulation for the roof of a house:
- polyethylene film;
- membrane materials.
The latter do not allow moisture to enter the insulation but also independently evaporate the accumulated condensate.
Flat roof insulation
We will separately consider possible insulation options for a flat roof. Typically, a vapor barrier is not required here or is part of the ceiling sheathing process. Waterproofing is mandatory for making insulation for the roof of a house.
There are several options for insulating a flat roof:
- built-up roofing materials based on bitumen. This will require the use of a gas burner, which requires some skill in handling;
- using sprayed roofing, which is called liquid rubber. It can be used on any roof, including pitched tops. Flat roof insulation
Spray roofing can be applied to any substrate, including roof coverings. This makes it one of the favorites in the insulation materials market in recent years. Using this material, you can making insulation for the roof of a house being built and repair the old one if its waterproofing layer has become leaky over time and does not cope with its task.