The Linksys extender is a reliable device that can help you to improve the existing signal’s overall performance. As you get this device at your place, there will
be more stability, strength, and faster transmission of signals. To avail of these benefits, get this extender and check simple setup points here that you can try out easily.
WPS Method For Setup
The Linksys extender is enriched with advanced technical features, and the WPS is one of them for its configuration. Luckily, if your existing router has a compatible WPS button, you must use this easiest WPS method. To begin with this process, locate the extender and your router together and plug in them as well. Then, push the WPS buttons from both devices and hold them till they start blinking with ideal LED colors. Within minutes the Linksys WiFi extender setup will be complete and the solid lights will tell you about this.
Access The Setup Window By Another Method
If in any case, you fail to perform the first method, try another one that requires accessing the setup window. There are two different ways to reach the Linksys WiFi marmitapharma
extender setup portal. But before going to the setup window, you must collect some prerequisites that the setup will require. Which are:
- The extender’s web and IP addresses.
- Also, the default login credentials of the extender.
- Your router’s SSID network name and password.
- Additionally, the router must have an internet connection.
- Moreover, your device has access to its web browser and app store.
- Lastly, an ethernet wire is optional to make a wired connection.
Web Portal Setup
To visit the setup window using a web browser, you will need to search for any of the Linksys addresses. So, open the compatible web browser on your networked device and type web or IP address in the search field. Ensure to clear the browser’s cookies, and caches first and that there are no spelling mistakes in the address. Then, insert the username and password in the Linksys extender login window and click login. Lastly, use the screen directions to finish the setup.
App Setup Portal
Another method to reach the setup window is by using the Linksys WiFi app after installing it on your smartphone. So, install the app on your device and open it to access the Linksys extender login page first. Afterward, choose the network from the wireless network list and configure it as you want. Finally, use the screen directions as shown to complete the Linksys WiFi extender setup process.
Note: If you have a Linksys velop for your place, then use the same app for the Linksys Velop setup app. That app will also guide you in the same way as this directs you for the extender setup.
Relocate The Extender
After configuring your extender successfully, move it to another place where you get slow internet speed. Unplug the extender and plug it into another power socket which must not be too far from the router. In addition, make sure there are no electrical appliances near this device that can interrupt its signals. That involves refrigerators, smart TVs, microwave ovens, 2.4 GHz cordless phones, and some others.
Update Extender’s Firmware
Apart from those settings, you must keep the extender’s firmware updated every time that Linksys offers it on a periodic basis. The latest firmware version also allows the extender to perform without showing any errors or glitches in the network.
To do that, visit the web interference again and do the firmware update if there is a new version available. In an alternative way, you can let it update automatically by activating the auto-update option on the Linksys app. Then, there will be no need to do it manually.
Manage Advanced Settings
Equally important to perfect setup, it is also mandatory to change the extender’s advanced settings to keep it working smoothly. In doing so, your extender will also remain free from technical bugs and other performance issues in the future. So, access the extender’s web interference and make changes in the settings as you want. Which includes the bandwidth channels, frequency bands, security encryption, and many other options that you can also access on the app.
Reset The Extender
If in any case, you start facing working errors in your Linksys extender, then use some basic resolving tips first. But, if the error still keeps occurring after attempting those tips, then reset the extender. There might be some mistakes in the previously configured settings that need reconfiguration. Choose any method from different reset approaches:
Factory Default From Web Portal
In the first method, you need to go to the web interface to select the Factory Default option. Once you click on this, the extender will discard its settings and then you can do the setup from scratch.
Reset By Pressing The Button
In another method, you can use the reset button from the extendere’s back or side panel. Locate the dedicated reset button and press it till you get a blinking light on it. When the light turns stable, configure your extender again using any approach.
Thus, using this simple setup guide you will be successful in installing your Linksys extender with less effort. However, if you face any issues with the setup or it’s working, then take relevant troubleshooting tips from us. Contact our experts right away and share your device’s errors with them.